Public Attributes
logical	haswamit
	.TRUE. More...

character(1024)	wamitfile
	Root of the filename for WAMIT2 outputs [-].

integer(intki)	unsum
	The unit number for the HydroDyn summary file [-].

real(reki)	wamitulen
	WAMIT unit length scale [-].

real(reki)	rhoxg
	Density * Gravity – from the Waves module. More...

integer(intki)	nstepwave
	Total number of frequency components = total number of time steps in the incident wave [-].

integer(intki)	nstepwave2
	NStepWave / 2 [-].

real(reki)	wavedomega
	Frequency step for incident wave calculations [(rad/s)].

real(reki)	wtrdens
	Water density [(kg/m^3)].

real(siki), dimension(:,:), allocatable	waveelevc0
	Discrete Fourier transform of the instantaneous elevation of incident waves at the platform reference point. More...

real(siki)	wavedir
	Mean incident wave propagation heading direction [(degrees)].

logical	wavemultidir
	Indicates the waves are multidirectional – set by HydroDyn_Input [-].

real(siki), dimension(:), allocatable	wavedirarr
	Wave direction assigned to each frequency [(degrees)].

real(siki)	wavedirmin
	Minimum wave direction from Waves module [-].

real(siki)	wavedirmax
	Maximum wave direction from Waves module [-].

real(siki), dimension(:), allocatable	wavetime
	Simulation times at which the instantaneous second order loads associated with the incident waves are determined [sec].

character(chanlen), dimension(1:27)	outlist
	This should really be dimensioned with MaxOutPts [-].

logical	outall
	[-]

integer(intki)	numouts
	[-]

integer(intki)	numoutall
	[-]

integer(intki)	wavemod
	The wave model to use. More...

logical	ptfmsgf2
	Supplied by Driver: Platform horizontal surge translation force (flag) [-].

logical	ptfmswf2
	Supplied by Driver: Platform horizontal sway translation force (flag) [-].

logical	ptfmhvf2
	Supplied by Driver: Platform vertical heave translation force (flag) [-].

logical	ptfmrf2
	Supplied by Driver: Platform roll tilt rotation force (flag) [-].

logical	ptfmpf2
	Supplied by Driver: Platform pitch tilt rotation force (flag) [-].

logical	ptfmyf2
	Supplied by Driver: Platform yaw rotation force (flag) [-].

integer(intki)	mndrift
	Calculate the mean drift force {0: no mean drift; [7,8,9,10,11, or 12]: WAMIT file to use} [-].

integer(intki)	newmanapp
	Slow drift forces computed with Newman approximation from WAMIT file:{0: No slow drift; [7,8,9,10,11, or 12]: WAMIT file to use} [-].

integer(intki)	diffqtf
	Full Difference-Frequency forces computed with full QTF's from WAMIT file: {0: No diff-QTF; [10,11, or 12]: WAMIT file to use} [-].

integer(intki)	sumqtf
	Full Sum-Frequency forces computed with full QTF's from WAMIT file: {0: No sum-QTF; [10,11, or 12]: WAMIT file to use} [-].

logical	mndriftf
	Flag indicating mean drift force should be calculated [-].

logical	newmanappf
	Flag indicating Newman approximation should be calculated [-].

logical	diffqtff
	Flag indicating the full difference QTF should be calculated [-].

logical	sumqtff
	Flag indicating the full sum QTF should be calculated [-].

real(reki)	wvlowcoff
	Low cut-off frequency or lower frequency limit of the wave spectrum beyond which the wave spectrum is zeroed. More...

real(reki)	wvhicoff
	High cut-off frequency or upper frequency limit of the wave spectrum beyond which the wave spectrum is zeroed. More...

real(reki)	wvlowcoffd
	Minimum frequency used in the difference methods [Ignored if all difference methods = 0] [(rad/s)].

real(reki)	wvhicoffd
	Maximum frequency used in the difference methods [Ignored if all difference methods = 0] [(rad/s)].

real(reki)	wvlowcoffs
	Minimum frequency used in the sum-QTF method [Ignored if SumQTF = 0] [(rad/s)].

real(reki)	wvhicoffs
	Maximum frequency used in the sum-QTF method [Ignored if SumQTF = 0] [(rad/s)].

Member Data Documentation

◆ haswamit

logical wamit2_types::wamit2_initinputtype::haswamit

.TRUE.

if using WAMIT model, .FALSE. otherwise [-]

◆ rhoxg

real(reki) wamit2_types::wamit2_initinputtype::rhoxg

Density * Gravity – from the Waves module.

[-]

◆ waveelevc0

real(siki), dimension(:,:), allocatable wamit2_types::wamit2_initinputtype::waveelevc0

Discrete Fourier transform of the instantaneous elevation of incident waves at the platform reference point.

First column is real part, second column is imaginary part [(meters)]

◆ wavemod

integer(intki) wamit2_types::wamit2_initinputtype::wavemod

The wave model to use.

This is for error checking – ideally this would be done in the main calling routine, not here. [-]

◆ wvhicoff

real(reki) wamit2_types::wamit2_initinputtype::wvhicoff

High cut-off frequency or upper frequency limit of the wave spectrum beyond which the wave spectrum is zeroed.

[used only when WaveMod=2,3,4] [(rad/s)]

◆ wvlowcoff

real(reki) wamit2_types::wamit2_initinputtype::wvlowcoff

Low cut-off frequency or lower frequency limit of the wave spectrum beyond which the wave spectrum is zeroed.